TPS-S8900 AUTOMATIC CHANNEL LETTER BENDING MACHINE
TPS-S8900 automatic channel letter
bending machine is conducted a comprehensive upgrade based on our TPS-S8700
precision automatic letter bending machine. It is substantial improvement in the
bending strength and processing height; This new machine has larger torque and
high precision and higher bending similarity. Its max. processing height gets
180mm and max. stainless steel bending thickness
is 1.0mm . It is the high-end
bending equipment for the first selection especially suitable for the high
letters (usually found in square and plaza), LED letters, stainless steel
letters, punching letters, resin letters, giant glowing letters, etc.
Structure Characters:
1. Reel type feeding:
The front roller flattening mechanism,
it can flatten materials effectively in advance, to avoid jam due to uneven
materials.
Slide rail type
pressure device and the plate guide chute, to avoid the phenomenon of arch
material and ensure smooth feeding process. Alternating
clamping feeding mechanism includes servo motor controlling and double screw nut
driver, with large torque, which has high
precision and high speed transmission performance to ensure actual feeding
accuracy to ±0.1mm and to eliminate physical skid phenomenon due to the roller pressure feeding.
3. Closed loop control system
All TPS bending machines have the
material tracking system, which can real-timely monitor any material stretching
and slipping during bending. With this closed-loop control of material length,
precise matching bended letter with panel face letter can be guaranteed.
4. V-shaped slotting
mode
In the process
of metal letter surrounding edge processing, slot mechanism is very
important. Its work frequency is very high, the load is large. In order to meet the bulk processing, the mechanism should be
strong and mechanical should be durable, our machine uses vertical plane
v-shaped slot. Mature technology, stable performance and reliable, suitable for
stainless steel, galvanized sheet, aluminum and other metal materials for V
slotting.
a.
Intelligent control slot depth,
free setting total slot depth, single slot depth and slot numbers.
b.
Servo motor control, high
precision nut driver, with the advantages of slot speed, high accuracy and
constant torque.
c. V slotting surface is smooth,
without any burr. Depth is consistent. The R Angle is not obvious when
angle bending. Ensuring letters with clear and beautiful outline.
d.
Uses high strength, dovetail shape
blade guide rail mechanism, its impact resistant ability compared with the straight
line guide rail mechanism ascending more than 10 times.
e.
The blade material is imported
high speed steel. High hardness, high temperature resistant, don't need to make
real-time cooling tool during the operation. The blade is with cutting points
at both ends. And it can be repeated grinding to make higher efficiency and lower
cost.
f.
Slotting with low
noise, no Mars, no soot. And the machine is with metal mess catcher cup.
Suitable for dust-free workshop.
g.
Plating surface after slotting is
colorless. It can meet the characteristics of no fine polishing when slotting mirrored,
rose mirrored, plating titanium surface and other non-ferrous materials, to
ensure the fine finished products.
5. Telescoping
double bending bars mechanism
The core of the bending machine is
arc shape effect. TPS-S8900 automatic channel letter bending machine uses servo
control, high rigid gear transmission, telescoping double bending bars, bending
mold quick change system; with large bending
torque, small interference area, no scratch surface, material thickness
is adaptable, suitable for high precision, high strength of industrial signs
processing.
Pictures of the
equipment details:
Letter samples
bended by the bending machine TPS-S8900
TECHNICAL SPECIFICATIONS:
Item
|
Parameters
|
l
Power Supply
|
l
AC200V
|
l Power
|
l
2.5KW
|
l Compressed Air
|
l
0.4 - 0.8Mpa
|
l Axis numbers
|
l
4pcs
|
l Min. Curving radius
|
l
R
|
l Min. Distance between interal and external angles
|
l
|
l Start to
|
l
|
l Applied Materials
|
l
Stainless steel , galvanizer
and aluminium flat surface plate and reel materials
|
l Material Thickness
|
l
Stainless steel 0.6 -
|
l Processing Height
|
l
20 -
|
l Material Feeding Method
|
Alternating double screw rails feeding
|
l Servo Motor Quantities
|
l
3Pcs
|
l Step Motor Quantities
|
l
1Pc
|
l Machine N.W. :
|
l
600Kgs
|
